Aw-gear-meters IF Series Manuale Utente Scaricare il pdf

VIEG Technical Data

In:

Weight:

Out:

Dimensions:

Supply:

0.13lb.

L=64mm; W=58mm; H=37mm

7-29 Volts DC .5mA

8V square wave pulse. Impedance 5.6K Ohms

Voltage pulses of amplitudes 0.5mV - 0.5V. Impedance 100 Ohms.

The IF series inductive pickup and VIEG

amplier are applied in high temperature

applications beyond the normal operating

range of standard magnetic pickups. The

inductive sensor generates a sinusoidal output

signal with an amplitude between 0.5mV to

0.5V. The VIEG is designed to amplify and

shape this signal providing a square wave

output voltage of 8V pp.

Application of the IF Series Inductive Pickups

The selection of an inductive pickup is recommended when the operating temperature exceeds

176°F/80° C. Operation can be expected up to 360°F/180°C with the standard version and up to

465°F/240°C using the HT version.

Because of the low signal levels involved, the following guidelines should be followed:

• Only use braided, shielded cable. The shield should only be connected at the amplier module as

indicated. The distance between the amplier and sensor should not exceed 3 meters/10 feet.

• Because of the low signal levels, direct the electronics as far as possible from other

electromagnetic eld sources.

• The pickup should be inserted until hand tight, then turned back 1/4rev. Tighten the lock nut to

secure this position.

• The meter can be mounted in any manner, however, every effort should be made to minimize

vibrations. Strong vibrations can have a microphonic effect on the pickup sensor. Flexible

connections will help to reduce pipeline vibrations considerably where this is a concern.

IF Series Inductive Pickup with Amplier Installation Guide

AW-Lake Company 8809 Industrial Drive, Franksville, WI 53126 Tel. 800-850-6110 Fax. 262-884-9810

Rev 1/2012 [email protected] www.awgearmeters.com Doc ID: IF Series w/ VTEG Amp.Ind

1 2

VIEG Technical Data 1
Technical Data 2

Sommario

Pagina 1 - VIEG Technical Data

VIEG Technical DataIn:Weight:Out:Dimensions:Supply:0.13lb.L=64mm; W=58mm; H=37mm7-29 Volts DC .5mA8V square wave pulse. Impedance 5.6K OhmsVoltage pu

Pagina 2 - Technical Data

AW-Lake Company 8809 Industrial Drive, Franksville, WI 53126 Tel. 800-850-6110 Fax. 262-884-9810Rev 1/2012 awinfo@aw-

Commenti su questo manuale

Nessun commento

Aw-gear-meters IF Series Manuale Utente

Navigare online o scaricare Manuale Utente per Sensori Aw-gear-meters IF Series. AW Gear Meters IF Series User Manual [en] Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Sensori Aw-gear-meters IF Series